Coming SoonProduct photo on the way
2-Core PVC Wire
2-Core Tinned Copper LED Wire · RVB · 0.35mm · Red & White 红白线 · 300m/Roll
Pre-Order
Members only
Members-only pricing & ordering
Log in or sign up to see wholesale prices, specs & order.
Log in / Sign upProduct Details
Reliable low-voltage wiring for LED strips, signage and lighting.
The wiring your installation actually depends on. This 2-core tinned copper wire (RVB) uses a 100% pure oxygen-free copper conductor — high purity, low resistance, and high conductivity, so power reaches the far end of your run with minimal loss and stays stable over time. The tinned finish resists oxidation and corrosion, keeping connections clean and dependable years after installation.
The conductor is built with a low eccentricity rate, meaning the copper sits properly centred in the jacket — consistent thickness all the way around, no thin spots, and even current-carrying performance along the whole length. Around it sits a thickened PVC sheath made from virgin material: flame-retardant, insulating, and genuinely durable. It resists pulling, water, sunlight, oil, freezing, and ageing, and it's eco-friendly and non-toxic.
Suitable for LED strips and modules, signal transmission, channel letters and neon signage, CCTV and monitoring systems, energy-saving lamps, home and commercial lighting, and urban illumination projects.
Available in 0.35mm, 0.50mm, and 0.75mm, in red & white, black & white, and rose gold & white transparent.
VARIANTS
- Red & White 0.35mm 红白线 — 17 line (0.14 × 2C) — 300m/Roll
- Black & White 0.35mm 黑白线 — 19 line (0.14 × 2C) — 200m/Roll
- Rose Gold & White Transparent 0.35mm 玫瑰金白透明线 — 17 line (0.14 × 2C) — 300m/Roll
- Black & White 0.50mm 黑白线 — 26 line (0.14 × 2C) — 300m/Roll
- Red & White 0.75mm 红白线 — 30 line (0.18 × 2C) — 100m/Roll
SPECIFICATIONS
- Model: RVB
- Conductor: 100% pure oxygen-free copper, tinned
- Insulation: PVC (virgin material)
- Cores: 2-core
- Properties: flame-retardant, insulating, anti-ageing
- Main use: LED strips, signal transmission, signage
Features
100% pure oxygen-free copper — high purity, low resistance, high conductivity
Tinned finish — resists oxidation and corrosion for long-lasting connections
Low eccentricity rate — copper sits centred; even jacket thickness, no thin spots
Stable transmission — low attenuation, reliable over long runs
Virgin-material PVC sheath — thickened, flame-retardant, and insulating
Built to last — resists pulling, water, sunlight, oil, freezing and ageing
Eco-friendly and non-toxic — safe, environmentally sound materials
2-core design — straightforward positive/negative wiring
Multiple gauges — 0.35mm, 0.50mm and 0.75mm for different current needs
Colour-coded — red & white, black & white, or rose gold & white transparent
Perfect for: LED strips & modules, channel letters & neon signage, signal transmission, CCTV & monitoring, energy-saving lamps, home & commercial lighting, urban illumination projects
How to Use
1. Choose the right gauge for the load. Thicker wire carries more current with less voltage drop. As a general guide, use 0.35mm for short runs and light loads, 0.50mm for medium runs, and 0.75mm for higher-current or longer runs.
2. Keep runs as short as practical. Long thin runs cause voltage drop, which shows up as dimming at the far end of an LED installation. If a run is long, step up a gauge.
3. Strip and connect. Strip back the outer PVC to expose the tinned copper, then connect by soldering or with a suitable connector. Observe polarity — the colour coding marks positive and negative.
4. Insulate every joint. Cover all connections with heat-shrink or insulating tape. For damp or outdoor locations, seal the joints properly against moisture.
5. Route it safely. Avoid sharp bends and sharp edges, and don't crush the wire under fixings. Keep it clear of heat sources.
6. Match it to your power supply. Confirm the wire gauge suits your driver's output current before powering up.
Note: this is low-voltage wire for LED and signal use. Have any mains-voltage work done by a qualified electrician.
AI Assistant
Ask Onyx about product information, size specifications, matching suggestions, or usage instructions.